Must Have Trijicon RMR Optics Plate System!
MK3 Sight Using RMR Plate System
Our new Mk3 Sight is everything you are looking for in an open sight! Unlike other manufactures we leave the batteries out of our products, and still offer the best lighting on the market! See your sight picture perfectly with a full body of edge glow to gather light, and our patented tritium placement directly behind the reticle for dust/dark situations.
Smallest profile in its class
Quick sight acquisition
Pin point accuracy
150 inches of windage, and elevation adjustment
Parallax free sighting system
Mk3 Mounting Options
The Mk3 Tritium Lit Sight mounts using the most widely used optic plate offered. THE Trijicon RMR CUT. Place the sight onto the RMR optics plate cut, insert the two screws on either side, and you are ready to go! Yes it can be mounted in the time it took you to read the steps! Also we bore sight the sights before they are packaged, so you will only have to make small adjustments. Does NOT work on the new RMRcc Cut.
What is dual illumination? Dual Illumination is when you have two sources of light in a single sight. Our Mk3 Tritium Lit Sight has been redesigned to have the most edge glow light gathering material we have ever offered. This edge glow will take light from all directions, and transmit that light to your reticles edge. This new design works so well that if you have any light (even a full moon) hitting the sight you will be able to see the reticle. The second part of that dual illumination is our patented tritium placement. We have a vile of tritium directly behind the reticle that will give you the same bright sight picture as you had during the day! A true battery free 24 hour sight!!
SeeAll VS Micro Red-Dot
Why buy a SeeAll Over a red dot? Well there are a lot of reasons, and here are a few of them!
Our Sight weighs under 1 ounce, red dots weigh over a ounce
Our Sight has no electronics, or batteries. Red dot sights have these unreliable parts.
Our Sight is constructed out of anodized aluminum, and acrylic ready for anything you might put it through. Red dots are made out of plastic.
This Mk3 Pistol Sight is the smallest sight in its class only measuring 1 inch wide, 1.8 inches long, and only .58 inches tall. Usually closer to .48 tall when you mount the sight into an optics cut!
Our Sight is fully adjustable, and unlike a red dot you can aim off the point of the delta. Rather than covering your point of impact with a big red dot.
Our Sight has a built in racking point making a quick, and easy experience when using it for speed, or simple plinking.
Finally Oversight Shooting offers a lifetime warranty on our products, because they are built to work, last, and perform!
Body is constructed of a CNC cut 6061 aluminum that has been anodized
Guts, and optic are acrylic for the best lighting, and durability
100% Made In The USA!
Comes with an allen key, and two mounting screws
1 inch wide
1.8 inches long
.58 inches tall
Weight .8 ounces
Tritium Life 15-20 Years
Comes with two screws, and an allen key
Works on anything with the Trijicon RMR optics plate
Plate Adapter Links
Mk3 will mount onto the same plate as the Trijicon RMR Red Dot Sight. Any system that says it is compatible with the RMR sights will also be compatible with the SeeAll Mk3 Sight
Doesn't fit the Zaffiri Precision Glock Slide, Or Swenson Optics Slide
Beautiful amazing love it target hits up to 100 yards quick acquisition after practice only with my laser barrel mount live rounds 400 out of 400 all targets
I haven't done a live fire with this sight yet, but have dry practiced. I own several other SeeAll sights and this one seems to be tougher for quick target acquisition.
Most likely due to the smaller format, the triangle can be tough to pick up. Small outlying arrows may help determining the direction you need to go and hit the triangle point.
I was pleased overall with this purchase. I opted for the tritium plate mount version. For the $249 price point I would have liked to see the mounting plate included instead of a additional purchase. Also the only complaint I might offer is that in the advertising, the sight picture with the delta reticle is shown to be smaller than actual size. I realize that pistol hold and eye relief will vary between users, but for me to achieve the advertised sight picture I had to hold at a 10 inch eye relief. My pistol hold eye relief is 24 inches at full arm extention, which makes the delta triangle fill the entire sight window and the two flanking sight lines are non visible....basically the farther away from the sight your eye is, the larger the sight picture as the magnifying lens enlarges it the farther your eye relief is. Over all I will be keeping it. I mounted mine on a 1911 .45 which required a trijicon rmr plate mount to be purchased separately... ($65) also the plate was not a quick switch with my GI rear sight. I had to do some fit,file work on my slide to interchange to the rmr plate.
I emailed them before placing my order for proper fit I was told to get the mk3 plate system once it arrived I was a bit upset when I received a see all sightings plate system that the optic plate is not included ? $250 why is a system missing what’s needed
It should only be $100 I will be returning it
I was a bit skeptical at first coming from traditional red dot optics to this, but that all went out of the window after putting my very first magazine through it. I had it zeroed prior to me firing it, so I got the opportunity to fire it as it should be from the start. Extremely accurate with perfect groups. I couldn’t be happier with it! I’ll never look at traditional optics the same again.