See All Sights

Mk3 Pistol Sight Plate System

Sale price Price $199.95 Regular price $0.00 Unit price  per 

Shipping calculated at checkout.

Must Have Trijicon RMR Optics Plate System!

MK3 Sight Using RMR Plate System

Our new Mk3 Sight is a great option for a pistol sight! Unlike other manufactures we leave the batteries out of our products, and still offer the best lighting on the market! See your sight picture perfectly with a full body of edge glow to gather light, and our patented tritium placement directly behind the reticle for dust/dark situations. 

Features 

  • Dual Illumination

  • Smallest profile in its class

  • Quick sight acquisition 

  • Pin point accuracy

  • 150 inches of windage, and elevation adjustment

  • Parallax free sighting system

  • Simple installation

  • Lifetime warranty 

Mk3 Mounting Options

The Mk3 Tritium Lit Sight mounts using the most widely used optic plate offered. THE Trijicon RMR CUT. Place the sight onto the RMR optics plate cut, insert the two screws on either side, tighten them down with the provided allen key, and you are ready to go! Yes it can be mounted in the time it took you to read the steps! Also we bore sight the sights before they are packaged, so you will only have to make small adjustments. Does NOT work on the new RMRcc Cut. 

Dual Illumination 

What is dual illumination? Dual Illumination is when you have two sources of light in a single sight. Our Mk3 Tritium Lit Sight has been redesigned to have the most edge glow light gathering material we have ever offered. This edge glow will take light from all directions, and transmit that light to your reticles edge. This new design works so well that if you have any light (even a full moon) hitting the sight you will be able to see the reticle. The second part of that dual illumination is our patented tritium placement. We have a vile of tritium directly behind the reticle that will give you the same bright sight picture as you had during the day! A true battery free 24 hour sight!!

SeeAll VS Micro Red-Dot

Why buy a SeeAll Over a red dot? Well there are a lot of reasons, and here are a few of them! 

Our Sight weighs under 1 ounce, red dots weigh over a ounce

Our Sight has no electronics, or batteries. Red dot sights have these unreliable parts. 

Our Sight is constructed out of anodized aluminum, and acrylic ready for anything you might put it through. Red dots are made out of plastic. 

This Mk3 Pistol Sight is the smallest sight in its class only measuring 1 inch wide, 1.8 inches long, and only .58 inches tall. Usually closer to .48 tall when you mount the sight into an optics cut!

Our Sight is fully adjustable, and unlike a red dot you can aim off the point of the delta. Rather than covering your point of impact with a big red dot. 

 

Our Sight has a built in racking point making a quick, and easy experience when using it for speed, or simple plinking. 

Finally Oversight Shooting offers a lifetime warranty on our products, because they are built to work, last, and perform! 

Construction 

Body is constructed of a CNC cut 6061 aluminum that has been anodized

Guts, and optic are acrylic for the best lighting, and durability 

100% Made In The USA!

Comes with an allen key, and two mounting screws

Specs. 

  • 1 inch wide

  • 1.8 inches long

  • .58 inches tall

  • Weight .8 ounces

  • Tritium Life 15-20 Years

  • Comes with two screws, and an allen key

  • Works on anything with the Trijicon RMR optics plate

Plate Adapter Links

Mk3 will mount onto the same plate as the Trijicon RMR Red Dot Sight. Any system that says it is compatible with the RMR sights will also be compatible with the SeeAll Mk3 Sight

Outerimpact Optics Adapters 

Customer Reviews

Based on 81 reviews
67%
(54)
20%
(16)
10%
(8)
1%
(1)
2%
(2)
R
Robert Sanders
Brightess of fiber optic reflex sights

At distances over 15 yards it is not as accurate for me as a red dot sight. However under all lighting conditions it was much brighter than any other fiber optic reflex sight that I tried. This is good for persons with poor eyesight. I just wish that they sold or included a protective cover for storage. I also would want a printed manual. I had to make my own printed manual. The video manual is useless at the range and was poorly done.

J
JW
Better as a rifle/shotgun sight

So this is my second sight, now with tritium. I was hoping that being it was called a pistol sight it would be a little better focused at arms length. The sight is blurry at arms length. Had others try it and they say the same things, fuzzy looking. My first sight sits atop a shotgun, focus is great and defined. Build of both are stout and well built. I only have about 100 rounds of 9mm thru the new tritium sight. The old sight probably has about 100 of 12g and hasn’t moved a bit, sighted at 50 with slugs but mostly run 00 buck. I ordered a high rise mount and plan to move the new sight to an AR. Build is great, easy to use.

P
Patrick Masyga
Mk3 pistol plate system

I mounted the Mk3 on my SR1911 it works great. I also have one on my CZ75 TSO that I us for bullseye competition.

J
Judson Coppock
Buyer

Think I will learn to like this sight, I do like it's potential but it's mounting to a Ruger 57 was a problem, Ordered the mounting plate recommended and the sight and plate did not match up, ordered another model that I thought would work from the info available only to find it did not match the pistol. Dremel came out and with some cutting and grinding on the adapter and heads of mounting screws, did get the sight and first adapter plate mounted together and mounted to the pistol, still have a sour taste in my mouth. Was thinking about ordering another for my Ruger LC Carbine, but have put that off for now.

R
Raymond Demby
1st time see all sight user

Learning to acquire the delta is the hardest part. Once you can do that, the sight is great.

Customer Reviews

Based on 81 reviews
67%
(54)
20%
(16)
10%
(8)
1%
(1)
2%
(2)
R
Robert Sanders
Brightess of fiber optic reflex sights

At distances over 15 yards it is not as accurate for me as a red dot sight. However under all lighting conditions it was much brighter than any other fiber optic reflex sight that I tried. This is good for persons with poor eyesight. I just wish that they sold or included a protective cover for storage. I also would want a printed manual. I had to make my own printed manual. The video manual is useless at the range and was poorly done.

J
JW
Better as a rifle/shotgun sight

So this is my second sight, now with tritium. I was hoping that being it was called a pistol sight it would be a little better focused at arms length. The sight is blurry at arms length. Had others try it and they say the same things, fuzzy looking. My first sight sits atop a shotgun, focus is great and defined. Build of both are stout and well built. I only have about 100 rounds of 9mm thru the new tritium sight. The old sight probably has about 100 of 12g and hasn’t moved a bit, sighted at 50 with slugs but mostly run 00 buck. I ordered a high rise mount and plan to move the new sight to an AR. Build is great, easy to use.

P
Patrick Masyga
Mk3 pistol plate system

I mounted the Mk3 on my SR1911 it works great. I also have one on my CZ75 TSO that I us for bullseye competition.

J
Judson Coppock
Buyer

Think I will learn to like this sight, I do like it's potential but it's mounting to a Ruger 57 was a problem, Ordered the mounting plate recommended and the sight and plate did not match up, ordered another model that I thought would work from the info available only to find it did not match the pistol. Dremel came out and with some cutting and grinding on the adapter and heads of mounting screws, did get the sight and first adapter plate mounted together and mounted to the pistol, still have a sour taste in my mouth. Was thinking about ordering another for my Ruger LC Carbine, but have put that off for now.

R
Raymond Demby
1st time see all sight user

Learning to acquire the delta is the hardest part. Once you can do that, the sight is great.